Changelog
What’s new
Only the changes about Accounts, newest first.
Denshin 0.0.46
- The menu under Den in the menu bar is rebuilt from the system's own rows and keeps to what matters: Den's state, who waits on you (what each session asks and for how long), one line per agent, with its maker's logo in its colour, saying how long it holds, Sessions on This Mac, New Session… (⌘N), Open Denshin, Settings… and Quit. An agent's accounts, with what each has left and when it comes back, are one level down, with that agent's Automatic Account Change and « Add Claude Account… ». The sessions, « Resume a Session… » and « Thanks, Goodbye… », which now asks before it stops anything, are under Sessions on This Mac. Hold ⌥ for the version, Refresh Accounts (⌘R), Check This Mac… and Made by Gwendall. With thirteen accounts the menu went from 41 rows to 16, and it no longer grows with your accounts. The window Accounts
Denshin 0.0.43
- In Accounts, a Claude account's sheet now says « Claude Code saw an unused reset 2h ago. It may still be waiting for you. » when Claude Code itself noted an unused limit reset for that account, above Open Usage, which takes you to claude.ai where the reset is used.
denshin listanddenshin reset-credit claudesay it too. Denshin only reads the note Claude Code leaves in the account's folder: it holds no Claude sign-in, sends nothing over the network for it and never spends a Claude reset, so the hint can stay until the note expires even after the reset is used. Accounts
- In Accounts, a Claude account's sheet now says « Claude Code saw an unused reset 2h ago. It may still be waiting for you. » when Claude Code itself noted an unused limit reset for that account, above Open Usage, which takes you to claude.ai where the reset is used.
Denshin 0.0.42
- When Codex refuses to spend a reset credit, an account's sheet now says « This reset was refused », followed by Codex's reason when it reads as a sentence;
denshin reset-creditand the rotation's notification say it was refused too. Before, the sheet said no answer had come back and to check the account before trying again. Accounts
- When Codex refuses to spend a reset credit, an account's sheet now says « This reset was refused », followed by Codex's reason when it reads as a sentence;
Denshin 0.0.41
- In Accounts, an account's sheet lists its reset credits with what each covers and when it expires, with a Use button that asks first; a dot on the account says when one expires within two days. For Claude, Open Usage takes you to claude.ai, where its reset lives, then reads the account again. Accounts The window
- Automatic rotation can now spend a reset credit when every other account of that CLI is at its limit, or a few hours before a credit would expire unused on a well-used window:
denshin rotate codex resets on(off by default). It spends the credit that expires soonest, at most one per account per day, and tells you each time. Accounts Command line - Settings and Accounts carry the same choice under Codex's rotation: « Use a reset to get unblocked », off by default and greyed out while rotation is off. When every Codex account is at its limit and a credit could free one, Accounts says so quietly and offers to turn it on. Accounts The window
denshin reset-credit codexlists your Codex reset credits across accounts, soonest to expire first, with what each covers. Spending one now says what happened in plain words (spent, already done, nothing to reset, none left) instead of always "credit spent", and a spend cut by the network is retried as the same attempt, never a second one. Command line Accounts- For a Claude account,
denshin reset-credit claudewith--openopens claude.ai Settings › Usage, where Claude offers its resets, then reads the account again; it never says a reset was spent. Command line Accounts - In Accounts, a model's own limit (Fable's week, for instance) no longer disappears when a later reading only carries the account's global limits: it stays until a reading replaces it or it expires. Accounts
- In Accounts, the hour an account comes back has its own line: at the limit it was cut by an ellipsis at the usual width. Accounts The window
Denshin 0.0.38
Denshin 0.0.35
- A Claude session Denshin runs now says in its status line, under the prompt, which account it is on and what that account has left, for example
maman@gwendall.dev · 5h 94% · week 91% left. It follows the session when it moves to another account at its limit, so an old limit message in the conversation no longer looks like the current one. Your own status line stays, after Denshin’s words, and your settings files are never written. Sessions Accounts
- A Claude session Denshin runs now says in its status line, under the prompt, which account it is on and what that account has left, for example
Denshin 0.0.34
denshin openon a Claude session running in Claude Code’s background now takes it back: when it is idle, Denshin stops the background job and resumes the same conversation in a Denshin tab, so it switches accounts at its limit and carries its context like any session Denshin started. A session at work is never cut: Denshin says so and you open it again once it is idle. An older tab that only attached to it is closed first, so there is never a second copy. Sessions Accounts
Denshin 0.0.31
- Opening a stopped session whose account is at its limit now starts it on the account with the most room that can work now and reads its history, and says so in one line, the way the rotation already moves running sessions. Before, it started on the account at its limit. When no other account can work, it says the limit before starting. Sessions Accounts
Denshin 0.0.30
- When an account’s limit comes back, Denshin now says how long first, then the day and the time in your language’s usual clock: “in 11h 33m, today 12:00 PM” in English, “dans 11h 33min, aujourd’hui 12:00” in French. Before, a return at noon read “samedi à 12.00” and could be taken for midnight. The window, the menu bar, notifications, the phone on the web and the account switch lines of the command line all print the same text. Checked with tests on the Mac’s engines and on the phone’s; not yet seen on a real iPhone or in the installed app. Accounts The window Notifications
Denshin 0.0.28
- Fixed a rare fault: what was written to a session’s terminal at the very moment that session ended could reach whatever opened right after it, another connection to the background service, or the next agent after an account switch. Writing to a terminal now stops the moment it closes. Reliability Sessions Accounts
Denshin 0.0.27
- A session that moves to another account at a usage limit now waits for the end of the running turn instead of cutting it: the command or answer under way finishes first, then the session moves. On Claude, Codex and OpenCode. Sessions Accounts Reliability
- When pressing Enter is what makes the session move, the message you typed is no longer lost: it is sent on the new account. If that account cannot start, it goes back to the one you were on, and if neither starts, Denshin shows you the message so you can send it again. Sessions Accounts Reliability
- After the move, the session goes on by itself, on Claude, Codex and OpenCode: no message to type again, no session to start over. Sessions Accounts
- A new session now starts on an account that still has quota, never on one set aside at its usage limit. Sessions Accounts
Denshin 0.0.26
- When a session moves to another account at a usage limit and Claude asks a question as it starts again, the keys you press now reach that question: Enter, the arrows and Esc answer it, and Denshin types the message to continue once Claude’s message box is drawn. Until now Denshin held those keys while it waited for the box, so the session stayed at its question and Denshin gave up after three minutes with nothing typed. A word or
Ctrl-Ctyped meanwhile is still yours and goes instead of the message, and so isCtrl-Dnow; keys typed meanwhile keep their order. Checked with a stand-in agent on a real terminal, not yet with a real Claude at a real limit. Sessions Accounts Reliability - That message to continue now asks to resume each sub-agent that was running by sending it a message, since its conversation is kept, rather than starting it over, and to run again only the background commands whose result is still needed, after reading what they left. Until now it said to restart them, which started sub-agents from scratch. A sub-agent’s turn cut by the limit, and what a command held in memory, cannot come back. The message shows whole in a real Claude Code 2.1.318, in English and in French; whether Claude then resumes its sub-agents rather than starts them over is not yet seen. Sessions Accounts
- A session that waited at its limit for another account to have room now still gets the message to continue: Denshin types it if the move comes within 15 minutes of the moment another account could take the session, no longer of the limit. On November 4, four sessions on one Mac waited half an hour that way and got nothing typed. Checked with tests, not yet at a real limit. Sessions Accounts Reliability
- When a session moves to another account at a usage limit and Claude asks a question as it starts again, the keys you press now reach that question: Enter, the arrows and Esc answer it, and Denshin types the message to continue once Claude’s message box is drawn. Until now Denshin held those keys while it waited for the box, so the session stayed at its question and Denshin gave up after three minutes with nothing typed. A word or
Denshin 0.0.25
- When an account reaches its limit, the notification now says the day it comes back when that is not today (“back Sunday at 00:00”, no longer just “at 00:00”); so does the Accounts page. Checked with tests, not yet seen in the running app. Accounts Notifications The window
Denshin 0.0.24
- Wherever accounts are listed (the menu bar, the window and its account menus,
denshin list,denshin pick), the ones with the most left come first, then those with no fresh reading, then those at their limit, the soonest back first, and last those signed out or missing. The account your terminal uses keeps its mark in its new place.denshin list --jsonkeeps its order. Checked surface by surface in tests, not yet seen in the running app. Accounts The window Command line - An account whose week is used up no longer counts as usable once its 5-hour window comes back: a session at its limit no longer moves to it,
--bestno longer picks it, and lists say it is back when its week is. Checked with tests on the rule, not yet with a real account at its weekly limit. Accounts Sessions Reliability
- Wherever accounts are listed (the menu bar, the window and its account menus,
Denshin 0.0.23
- When the account a session is moved to at a usage limit refuses it, the session goes back to its own account as before, and now the next move still types the message to continue, if it comes within 15 minutes of the limit. Until now that next move typed nothing. A Codex session also makes that next move as soon as its screen is still, instead of waiting for it to look idle. Checked with stand-in agents, not yet with a real Claude or Codex. Sessions Accounts Reliability
- Denshin now also reads a Codex usage limit in the record Codex keeps of each session. A limit the screen no longer shows, after a relaunch that does not draw it again or under a question drawn over it, now moves the session to another account without waiting for it to look idle, and the message to continue follows. Checked on the shape of real Codex records, not yet read from a live session. Sessions Accounts Reliability
Denshin 0.0.22
- When a Codex session hits its usage limit, Denshin now sees it, moves the session to another account and types the message to continue. Until now it could miss the limit, for one once Codex’s question about another model had been moved through with the arrow keys, and wait for the session to look idle: the move came minutes later, with nothing typed to continue. Checked on what a real Codex 0.166.0 draws at a test limit. Sessions Accounts Reliability
Denshin 0.0.21
- When a session moves to another account at a usage limit, Claude now goes on by itself: Denshin waits for Claude’s message box to be drawn, types the message to continue in it, and presses Enter only once that message shows. Until now it could go before the box was drawn, and you had to send it yourself, sometimes even write it. Checked with Claude Code 2.1.318. Sessions Accounts Reliability
- Two kinds of usage limit that left a session stopped on its account now move it to another: a turn and a background agent stopped by the limit in the same second, and a limit Claude Code reports as an unknown error. Accounts Reliability
- On a busy Mac, the background service now hears every usage limit right away. macOS could fail to tell it, and the move to another account then waited for the next check of the account, up to ten minutes, too late for Claude to go on by itself. The service also no longer keeps a watch that could hold it for seconds as it stops. Accounts Reliability
Denshin 0.0.18
- In Add an account, the reason a command line tool cannot be added yet is easy to read again. Accounts The window
Denshin 0.0.17
- Starting Codex or Claude without naming an account can now use another available profile when a sign-in failure is confirmed. Your explicit account choice and automatic switching preferences are respected. Sessions Accounts Reliability
- Check account sign-in with
denshin list --auth: see native verification results and reconnection commands. Add--liveto check now, or--needs-loginto filter the list. Live Claude checks may use a short model turn; the command reports this before starting. Accounts Reliability - Terminal launches and supported account checks now use the executable you selected. A disabled runtime can be enabled again without losing that choice. Sessions Accounts Reliability
Denshin 0.0.16
- Codex can renew its sign-in through its own authentication system before reading account usage. Revoked sign-ins are reported as needing a new sign-in. Accounts Reliability
- Automatic account switches skip accounts whose latest usage check failed or is out of date. Accounts Sessions Reliability
Denshin 0.0.11
Denshin 0.0.10
- A new session no longer starts on an account that is at its limit, and a
denshin runscreen that froze while the agent kept working gets its picture back. Accounts Reliability
- A new session no longer starts on an account that is at its limit, and a
Denshin 0.0.9
Denshin 0.0.8
- With no account yet, the window leads you straight to adding your first one, and New session says why it cannot start instead of just greying out its button. Setup Accounts
- Plainer words: an account switch at the limit says what happened and when the account is back, "daemon" is now "Background service", and a background service that fails to start is explained in plain language. Accounts Setup
Denshin 0.0.6
- From a session you can now rename it, attach files to your message, stop it, or switch it to another account. Add an account by signing in right from the Accounts page. Sessions Accounts
- When a session moves to another account because its own hit its limit, the agent now picks up where it stopped. You can turn this off in Settings. Accounts Sessions
Denshin 0.0.5
- The Accounts page says until when each tool can keep working, and what each account has left for the next 5 hours and for the week. An account close to its limit turns amber, in the window and in the menu bar. Accounts
Denshin 0.0.3
- The accounts overview shows how much of each limit you used and when it resets. Accounts
Denshin 0.0.2
- When a session's account hits its limit, Denshin moves it to another of your accounts even when the app is closed. Accounts
Denshin 0.0.1
- Den, in the menu bar, shows the time that matters: when your Claude Code and Codex accounts are about to hit their limit, or when they come back. Its menu lists your accounts and every agent session on this Mac, by project. Accounts